Replace Door Lock: What's The Only Thing Nobody Is Talking About
How to Replace Door Locks
Replacing the door lock could be a tricky task. It is essential to protect your home from burglars. repair window locks should also change your locks when you move in with a new housemate, or if you rent out your house.
The majority of new locks are designed to fit standard door widths. If your door is wider, you'll need a "thick-door" kit with longer screws and longer tail pieces for the deadbolt.
Remove the lock from the old one.
You'll need to take your old door lock from the door before you can install the new one. You can do this using the help of a few tools, but make sure not to scratch your door or frame. Making use of the right tools will save you money in future repairs.
Remove the screws that hold on the trim and handle. This can be accomplished with the help of a screwdriver. Once the screws have been removed, you can remove the trim. You can then get to the screw that holds the handle and trim to the door. After you have removed the screw, you can open the handle and take out the lock cylinder from the door.
One of the most common signs that your lock is getting old is when you can no longer move the key inside. This is due to the tumblers wearing out and eventually stopping moving up or downward, causing the lock to cease to function. If this happens, you'll need to bring the lock to a locksmith in order to be reset-keyed.
When you're ready for replacing your deadbolt, start by removing the screws that fix the faceplate. If your kit does not come with new screws, you can purchase them at an hardware store. If you're installing a mortise locking it is also necessary to remove the screws holding the external roseplate to the door. After you've removed the screws, take the plate and dead bolt from the door.
Next, look for a pinhole in the handle trim inside. If you spot a pinhole you can insert a straightened safety pin into it. You can also test a flat screwdriver against the slot or depression. This should open the lock handle and expose screws that can be removed to remove the entire lock from the door.
Installing the new lock
If you're looking to change your lock following a break-in or simply want to change the look of your door installing the new lock is easy. However, it's important to measure your door to ensure that you buy a new lock that is the correct size for your door. This is especially important for deadbolt locks, which have to be of a certain size to fit into the strike pocket and bolt plate. If you're not sure of how to measure, ask for assistance at your local hardware store or locksmith.
If you are replacing a mortice, you can use the existing centrerail as a reference to locate the new mortise. Once you've marked the location of the lock, drill holes along the central line of the same size as the lock. Then, chisel the wood until you've got a rectangular space to fit your mortice lock. Install the lock, and then outline the faceplate with an outliner. Mark and drill screw holes to secure the faceplate.
When rekeying locks you can save money by buying a starter kit that includes a set of re-keyable keys and a blank key. Kits can be purchased at a variety of online stores as well as hardware and home improvement stores. They also include a set of instructions that should aid you in the process.
Check your lease agreement if you are renting prior to changing locks. You may have to give the landlord the keys to the new locks. If this is the case, you could be required to dismantle the old lock and replace it with a standard lock. You can purchase a standard lock from your nearest hardware store, or you can purchase a high-tech smart lock that connects to the Wi-Fi of your home and allows you to lock and unlock your door from afar. The best option is a Schlage Smart Lock, which can be used with a variety of door knobs and levers. This system can also be connected to your smart home security hub and will send alerts whenever your door is locked or opened.
Installing the new lock
A damaged lock poses an enigma for security, which is why it's essential to replace it as quickly as possible. Luckily, replacing the door lock is a quick and easy task that anyone can complete. The first step is to take the old lock from the door. The screws that hold the lock in place are removed and the lock is pulled out. Depending on the type of lock you have, you may need an Allen wrench or a screwdriver. Save all the parts of the lock that were used and store them in a safe place.
Then, insert the new lock onto the door. The majority of kits come with a cardboard template of how the lock should fit to the door. If the template doesn't match to your door, you can trace around it using a pencil or use a chisel remove extra material. Once the new lock is installed, ensure that the latch plate's interior is aligned with the mortise lockset hole for a secure fit.
Be cautious not to over tighten the lock when you install it. This can cause your lock to squeak or even break. If you have a keyed lock make sure the spindle is aligned with the hole in the knob. If it's not, you can make use of the screwdriver to push the lock into the knob.
Install the baseplate with the design that is included with the lock after you've finished installing it. If the lock does not have a base plate you can buy one that matches the hardware.
The final step is to test the lock to ensure that it is working. You can do this by inserting the key into the lock and turning it so that it opens. If it doesn't work then you should contact a locksmith.
You can also stop burglaries by having professionals reset your locks. This involves changing the internal tumblers of your lock so that it is not able to accept the keys you have previously used. This will make you feel secure and safe in your home.
Test the new lock
If you're installing a new lock, you must ensure that it functions as you intended. It's very important to carefully follow the directions. You may not be able to unlock your door if you don't. If you're not sure what to do, you can seek out a professional locksmith help. A locksmith can also give advice about the best locks for your home.
If you have trouble opening your lock, it could be an issue with the handle or latch. Try lubricating your latch by spraying it with WD-40. This can sometimes fix the problem. However, you might need to replace the latch completely if it's no longer functioning correctly.
Another possibility is that the lock has been installed incorrectly. The inner door handle clip may be damaged or missing from the new lock. In this case, you should grab the handle from the inside and insert a plastic retainer clip. The handle will then be attached to the lock and the lock tested.
It's important to check the keypad after replacing your lock to ensure that it is working correctly. You can test it by inserting the key inside and turning it. If the keypad works correctly, your door will be able to open and lock.
Check the deadbolt to make sure it is working properly. If it isn't then you must take the latch off and remove the Phillips head screws on the side of the door to release it. Replace the deadbolt that was installed with the new one. Make sure to orient and load in the deadbolt lock in the correct way.
Spindle testing is another way to test a new lock. This can be done by inserting a screwdriver in the spindle. This test should be carried out prior to reinstalling a lock to avoid any mistakes.